@VijeMiller · 5h
America, land of the too much free .. free to the point that every one became distracted that free didn't mean free but rather free for a select few .. the founding few .. #FoundersPride
https://www.thegatewaypundit.com/2018/08/muslims-hold-massive-rally-at-vikings-usbank-stadium-chanting-allahu-akbar-video/
14:39:17 155 018
Miter
TVShow 3X38 Fatel
Restoration Evaporation Retaliation
Several hundred postings on vijemiller.com (formerly tvmiller.com and vtyhw.com) have been removed for reason(s) ranging from dead-links to irrelevant data to prattling gibberish. Several hundred more are under review for deletion for the latter. Shd any links now be found dead, adjust your self accordingly.

Update
· 'Thoughts' and numerous update(s) posting have been removed.
· The Literature menu page contents has been distributed to Miscellaneous and then removed.
Shelved - Gravity Room Agitator
The premise revolved around the common (annoying) state at which people in metropolitans (NYC in particular) live -​ locked away. With windows perpetually shut and barred and presumably the belief that air is replenished by opening the front door briefly when you come and go - this novelty project was to be a decorative dual blade room air agitator that was partially assisted by elevating a weight by way of cranking the blades with an electric motor - which then returning downward - counter spun the blades. Due to my time ending here and finding my self no longer interested and/or motivated - to hell with it [spits]


Ingredients
1. DC Motor
2. (2) Lever Switch
3. 555 IC
4. Cardboard
5. String

Archive
https://hackaday.io/project/29497-gravity-room-agitator
TVShow 3X37 Coin Cell Challenge (1) Shower Battery Charger
The entirety of projects in the Hackaday.com Coin Cell Challenge are removing energy from coin cell batteries with out giving back. Thievery! Being the kind, fair and generous human being that I am not - and instead out of spite - this project makes use of the abundance of unused kinetic energy in the bath room to recharge your coin cell battery.


Ingredients
1. LR2032 Rechargeable Coin Cell Battery
2. PVC Threaded Nipple
3. PVC Threaded Couple
4. Acrylic (Picture Frame)
5. (2) DC Motors
6. (2) Diodes

Notation(s)
1. 3D printing, efficient motors and just about every thing else - and perhaps this would be a more practical concept -- then expand that to the theory of every plumbing joint housing a generator.
2. One point not quite enough volts - motors were to blame - followed in close second by inferior glue and acrylic. It is the thought that counts [wink]
3. Per (2) - the motors were scavenged from vibrating tooth brushes - which one may presume drive very little current while operating at 1.5V - thus removing your plaque is not nearly as an aggressive of a task as is generating electricity to charge a coin cell battery.
4. Always diffuse lighting - especially when you did not.

Archive
https://hackaday.io/project/28972-coin-cell-challenge-shower-battery-charger
https://www.youtube.com/watch?v=PnTIEWQ48zw
https://hackaday.io/contest/28283-coin-cell-challenge
TVShow 3X36 The Silence of The Phones