Iceland has already accomplished as much as I could have wanted in the #WorldCup ... by embarrassing Tiger Woods commentators ... shit ... I meant Lionel Messi commentators.
0:29:22 91 018
Miter
TVShow 3X37 Coin Cell Challenge (1) Shower Battery Charger
The entirety of projects in the Hackaday.com Coin Cell Challenge are removing energy from coin cell batteries with out giving back. Thievery! Being the kind, fair and generous human being that I am not - and instead out of spite - this project makes use of the abundance of unused kinetic energy in the bath room to recharge your coin cell battery.


Ingredients
1. LR2032 Rechargeable Coin Cell Battery
2. PVC Threaded Nipple
3. PVC Threaded Couple
4. Acrylic (Picture Frame)
5. (2) DC Motors
6. (2) Diodes

Notation(s)
1. 3D printing, efficient motors and just about every thing else - and perhaps this would be a more practical concept -- then expand that to the theory of every plumbing joint housing a generator.
2. One point not quite enough volts - motors were to blame - followed in close second by inferior glue and acrylic. It is the thought that counts [wink]
3. Per (2) - the motors were scavenged from vibrating tooth brushes - which one may presume drive very little current while operating at 1.5V - thus removing your plaque is not nearly as an aggressive of a task as is generating electricity to charge a coin cell battery.
4. Always diffuse lighting - especially when you did not.

Archive
https://hackaday.io/project/28972-coin-cell-challenge-shower-battery-charger
https://www.youtube.com/watch?v=PnTIEWQ48zw
https://hackaday.io/contest/28283-coin-cell-challenge
TVShow 3X36 The Silence of The Phones
TVShow 3X35 Spectrumlife
Orbital Clock OTC Packed Extension
Now made available for down load (open source) is our Orbital Clock browser extension - so that you may subvert extension or add-on store fronts and load the packed or unpacked extension in to any developer enabled browser that permits - tested on FF/Chrome/Opera

Packed Extension (.zip) - otcext.zip
TVShow 3X34 Telepathy
TVShow 3X33 Telekinesis
Resistance Theory - Excited State Density
Relative to the abstract of Resistance Theory - all matter is a balanced confinement of wave(s) collision. Light is the state of residual wave refraction from these collisions - spilled thru less dense wave lengths (matter). What this then concludes is that all matter has effectively an ethereal layer that is in a transition between denser wave forms and refraction - i.e. when you are touching an object - you are not touching the visual exterior of the object - but the state just below the visualized state - as is well the density of the finger touching the object - on an infinitesimally minute level of course.


Resistance Theory [Search]
TVShow 3X32 Pew Pew


Artfully experimenting - such as it is - with in our [my] equipment limitations.
TVShow 3X31 Life Alert
Arduino Proximity Bubbler Not Bubbler


Ingredients
1. Arduino MKR1000
2. Arduino Uno
3. Ultrasonic Module
4. Motion Sensor Module
5. Neopixel RGB Strip
6. Picture Frame Acrylic
7. 1000pf Capacitor
8. 330 Resistor
9. 10K Potentiometer

Notation(s)
1. More or less, this was to reacquaint my self with the MKR1000(s) I had been given at MakerFaire NY -- Thx Arduino's Arturo and Christina! -- using scraps being thrown out while in the process of moving [again] -- before the great war. #Project47
2. Learning to prefer to self-host IoT streams -- if better positioned, I would implore and collaborate with some one to create open-source privately hosted IoT software for your own domain - so as to permit more flexibility of function.
3. As said, only scraps -- no digital potentiometer or transistor? Hold my Don Julio -- wanting to thread 120V, we [me] improvised with a servo and hot glue. https://hackaday.io/project/27578/log/68403-no-digital-pot-or-transistor-hold-my-don-julio #Hackcycling
4. Shelved, bcz - meh.
5. The scavenged motion sensor and a-to-be-abandoned-Arduino-Uno were then applied to an entrance way motion triggered random Neopixel display.

Archive
https://hackaday.io/project/27578-arduino-proximity-bubbler-not-bubbler